Garage floor concrete in Hesperia CA - a slab ready for your car, coating or lift
Cracked, stained or sunken garage floor? We check whether it can be resurfaced or needs replacing, then pour a slab that suits your plans.
- Fully licensed and insured.
- Free estimates at your property.
- We respond within 1 business day.
Resurface the old floor or pour a new one?
It comes down to whether the slab underneath is still solid, so I check for movement, sunken spots and drainage before suggesting either one.
Resurfacing is enough when:
- The slab feels solid underfoot
- Cracks are thin and not spreading
- No section has sunk or tipped
- Water drains out the way it should
- You mainly want a fresh surface
A new slab is better when:
- Sections have sunk or heaved
- Cracks keep widening or shifting
- Water pools or runs toward the house
- The top is crumbling deep down
- You're planning a car lift later
How a garage floor job goes
You call me
I answer the phone myself, and if I miss you, I call you back to set a time to come look at your garage.
A time to meet
I look at the floor
I check the slab, ask what the garage is for, and walk you through resurfacing versus a new floor and what each one changes.
Your options explained
You get an estimate
I ask about coatings or a lift you might add later, because both change how the slab is built, and then you get your estimate.
Your estimate
Permit and pour day
Once you say go, we pull any permit the job needs, since Hesperia wants it issued before work starts, then plan the pour around the day's conditions.
A planned pour
Clean-up and walk-through
We clear out the forms and debris and clean up, then I walk the finished floor with you so you can see it and ask anything.
A finished floor
What garage floor concrete includes
Checking the old floor
We look at the cracks, sunken spots and surface to decide whether your slab can be resurfaced or needs replacing.
Removal and haul-off
If the old floor has to go, we break it up and haul it away so the new one starts clean.
Digging out the base
We dig out soft dirt and pack the subgrade, the ground the slab sits on, so the floor doesn't settle later.
Forms, rebar and slope
We set forms and rebar, the steel that helps hold the slab together, and slope the floor so water runs out the door.
Pouring and finishing
We place and finish the concrete smooth for a coating or with a broom finish, a light texture that gives shoes and tires grip.
Control joints
We cut control joints, shallow grooves that give the slab a planned place to crack, on time so cracks stay in straight lines.
What changes the price of a garage floor?
The biggest swing is whether your old floor can stay. Resurfacing a solid slab keeps the old concrete in place, while a new floor means breaking out and hauling the old one, digging out and packing the base, and pouring fresh. After that it's the size of the garage, how thick the ground under it says the slab should be, and extras like a moisture barrier for a coating or the reinforcement a lift calls for.
Finishes and the site add the rest. Staining or a decorative concrete finish costs more than a plain one, and a garage cut into a slope may need concrete retaining walls beside it. The schedule mostly turns on any permit and the weather on pour day, and I go over each of these at the estimate.
Why Hesperia homeowners call us for garage floors
I learned concrete working alongside real crews before starting this business in 2017, and we're known for slowing down to explain things. If your budget's tight, I'll tell you to spend it on the base before the finish, because the base is hidden on day one, but it's what keeps a garage floor from settling with the dirt under it.
In California, forming, pouring and finishing flat concrete like a garage floor falls under the state licensing board's concrete contractor class. We're fully licensed and insured, I write your estimate myself, and our own crew does the work with me on site running it. Call me at (442) 267-8610 or use the form below to get started.
- Plain answers before anything is poured
- Our own crew, with me on site
- Satisfaction guaranteed on every job
Get a free estimate for your garage floor
Tell us your garage size, the floor's condition, any coating you want and any lift plans. I reply within one business day to set up your free on-site estimate, with no obligation.
(442) 267-8610Garage floor questions we hear
How much does a new garage floor slab cost near Hesperia?
A new concrete slab in the San Bernardino area usually costs about $7 to $13 per square foot, and removing an old slab or adding staining or stamping costs extra. That's what the market usually charges, not our quote, and your number depends on whether the old floor can stay and what goes under the new one. Your own figure comes from the estimate I write after looking at the garage.
How do I know if my garage floor can be resurfaced instead of replaced?
You can resurface only if the slab underneath is solid and stable, because an overlay renews the surface but won't fix a floor that's settling or moving. A bonded overlay, a thin new layer that grips the old concrete, gives you a fresh look, texture and wear surface. That's the first thing I check when I come out, since the old slab's condition decides whether an overlay is worth paying for.
Do I need a permit for garage floor concrete in Hesperia, and who files it?
A new garage or a slab foundation needs a permit from Hesperia Building & Safety, and if you're replacing the floor in an existing garage, we ask the city whether your job needs one before we start. Only you, your licensed contractor or an authorized agent can get the permit, so we pull it as your contractor and schedule the inspections. That way you're not left filing paperwork or guessing.
Should a garage floor getting an epoxy coating have a vapor retarder?
Yes, one garage slab guide says a vapor retarder, a layer under the slab that slows moisture rising from the soil, is worth having if the floor will get an epoxy coating or the garage will be heated and finished. The same guide says a bare broom-finished floor in an unheated garage doesn't need one. That's why I ask about the finish before we pour, because nothing can be slipped under the slab afterward.
How thick should a garage floor slab be for cars or a car lift?
One garage slab guide calls 4 inches the practical standard for cars on a well-prepared subgrade, rising to 5 or 6 inches where the ground under the slab is poor. If you might add a two-post lift later, get the lift maker's concrete requirements before we build, since its loads and anchors can call for a set thickness, strength and reinforcement. Planning for it now beats cutting out a new floor later.
What is the best way to pour concrete in Hesperia's summer heat?
Pour early and finish promptly. Heat, dry air and a fair bit of wind pull water out of fresh concrete and make it set faster, and a ready-mix industry group advises early morning pours whenever possible. We plan pour day around the weather so your garage floor doesn't end up with a weak, dusty top.
Areas we serve around Hesperia
We're based in Hesperia and pour garage floors in Victorville, Apple Valley and the other cities below. Pick yours, or call if your city isn't listed.
Get a quote from C&L Hesperia Concrete Company
Call (442) 267-8610 or use the form before choosing a coating or lift, so we plan the slab around it.